1) M. Nath. “Analysis and Identification of Kidney Stone using Kth Nearest Neighbour (KNN) and Support Vector Machine (SVM) Classification Techniques”, Pattern Recognition and Image Analysis: Advances in Mathematical Theory and Applications, 3,3, 1054-6618, 1555-6212, 2017.
2) M. Nath. “ A Comparative Analysis of Segmentation Segmentation Techniques for Lung Cancer Detection” Pattern Recognition and Image Analysis: Advances in Mathematical Theory and Applications, 1, 1, 1054-6618, 1555-6212, 2019.
3) S. Chakraborty. “Study of an IR Defusing Surface of a Float Used as Non-Contact Level Sensor”, Sensors & Transducers, 183, 12, 6678-6688, 2015.
4 S. Chakraborty. Study on Further Modification of Non-Contact Capacitance type Level Transducer for a Conducting Liquid, IEEE Sensors Journal, 15, 11, 6678-6688, 2015.
5) S. Chakraborty. Design of a Simple Temperature Transmitter Circuit of an Electric Heater Operated Water Bath, IEEE SENSORS JOURNAL, 18, 8, 2018.
6) S. Chakraborty. “An innovative method for the measurement of liquid level of a conducting liquid”, IEEE conference, ICCECE16, 1-5, 16-17, 2016.
7) S. Chakraborty. "Study of a modified IR defusing surface as a uniform source and its application as non-contact level sensor", IEEE conference, CIEC16, 106-110, 28-30, 2016.
8) S. Chakraborty. “A Improve Technique of Flow Measurement Using Pipe Line Pressure Head as a measuring Parameter”, IEEE conference, ICCECE17, 22-23, 2017.
9) B. Kumar. A Review on Capacitive type Sensor for Measurement of Height of Liquid Level, Measurement and Control, SAGE, 2014.
10) B. Kumar. Design of Flow Transmitter Using an Improved Inductance Bridge Network and Rotameter as a Sensor, IEEE Transactions on Instrumentation and Measurement, 2014.
11) B. Kumar. Study of an Electro-optic Technique of Level Transmitter using Mach-Zehnder Interferometer and Float as Primary Sensing Elements, IEEE, Sensor Journal, 2016.
12) B. Kumar. Design and Development of an Electro-Optic Type-Flow Transmitter Using Mach–Zehnder Interferometer, IEEE Transactions on Instrumentation and Measurement, 2016.
13) B. Kumar. Design and development of a level transmitter using force resistive sensor as a primary sensing element, IET Science, Measurement & Technology, 2018.
14) B. Kumar. Design of an Inductive Pickup type Displacement Transducer using an electro-optic effect of lithium niobate based Mach-Zehnder Interferometers, IET Science, Measurement & Technology, 2018.
15) G. Shankar., Kumar, K.S. and Mahato, P.K., Free Vibration Analysis of Delaminated Composite Plates Using Finite Element Method. Procedia Engineering, 1067-1075, 2016
16) G. Shankar., Kumar, K.S. and Mahato, P.K., Vibration analysis and control of smart composite plates with delamination and under hygrothermal environment., 53-68, 2017.
17) G. Shankar. and Mahato, P.K., Vibration analysis and control of delaminated/or damages composite plate structures using finite element analysis., 1-8, 2017.
18) G. Shankar, K.S. Kumar and Mahato, P.K., ‘Transient analysis and control of delaminated composite plates in hygrothermal environment using active fiber composite actuator’, 2018.
19) G. Shankar., Varun, J.P. and Mahato, P.K., Effect of delamination on vibration characteristic of smart laminated composite plate. Journal of Aerospace System Engineering, 10-17
20) G. Shankar, P.K Mahato. Vibration control of laminated composite structure with material uncertainty or damage,
21) G. Shankar, Kumar, K.S, P.K Mahato, Free Vibration Analysis of Delaminated Composite Plates Using Finite Element Method,
22) G. Shankar, P.K Mahato, Effect of delamination on vibration characteristic of laminated composite plate, 2017.
23) Gautam A.and Sarkar P. K., Continuum Damage Mechanics based ductile behaviour and fatigue life estimation of low carbon steels, Journal of Materials: design and applications, 2018.
24) Gautam A. AjitK. P., SarkarP. K., A nonlinear CDM based damage growth law for ductile materials, Materials Research Express., 5, 01-12, 2018.
25) Gautam A. Ajit K. P., Sarkar P. K., Fatigue Damage Estimation through Continuum Damage Mechanics, Procedia Engineering. 173, 1567-1574, 2017.
26) Gautam A. Sarkar P. K. Jangid R., Ajit K. P., K. PriyaAjit, Ductile and Fatigue Behaviour Estimation of Lightweight High-Strength Al 2024, Materials Today: Proceedings, 5, 7873-7881, 2018.
27) Ajit K. P., Gautam A.,Sarkar P. K., Ductile fracture behavior of low carbon high strength steel using continuum damage mechanics. International Journal of Materials Research:, International Journal of Materials Research:, 106, 9, 1010-1013, 2015.
28) Ajit K. P., Gautam A., Sarkar P. K, Ductile Behaviour Characterization of Low Carbon Steel:a CDM Approach. Journal of Mechanical Engineering:, Journal of Mechanical Engineering:, 62, 5, 299-306, 2016.
29) Ajit K. P., Gautam A., Sarkar P. K, Fatigue Damage Estimation through Continuum Damage Mechanics revisited , Journal of Mines, Metals and Fuels, 64, 11, 214-217, 2016.
30) Ajit K. P., Gautam A., Sarkar P. K, Fatigue Damage Estimation through Continuum Damage Mechanics revisited , Journal of Mechanical and Civil Engineering (IOSR-JMCE), 10, 1, 47-51, 2013.
31) Srivastava J. P., Sarkar P.K,Gautam A.Yadav R., Kumar H., Micromechanical characterisation of Indian rail steel, Materials Science and Engineering, 2018.
32) DwivediS., AjitK.P, Gautam A., Breakdown investigation of Diesel Engine Camshaft of Front End Loader, Materials Science and Engineering, 2018.
33) Gautam. A. Ajit K. P., Sarkar P. K., CDM based Fatigue damage characterization of Al 2024 Aluminum alloy,, International Conference on Science and Engineering of Materials, 6-8, 2018.
34) Gautam. A, K.P. Ajit, Vehicle emission diagnosis based on fault tree analysis (FTA) and OBD, 2nd national conference on mining equipment: new technologies, 9-10, 2015.
35) Gautam A. Ajit K. P., Sarkar P. K., FEM analysis of a connecting rod for failure condition estimation- a case study, Int. Conf. on Industrial, Mechanical and Production Engineering:, 27-29, 2014.
36) Ajit K. P., Gautam A., Sarkar P. K, Ductile Fracture Behavior of Low Carbon High Strength Steel Using Continuum Damage Mechanics,. International Conference on Advances in Design And Manufacturing, 2014.
37) Ajit K. P., Gautam A., Sarkar P. K, Ductile Damage Evaluation of Low Carbon Steel: A CDM Approach, International Conference & Exhibition on Fatigue, Durability and Fracture Mechanics, 2015.
38) Ajit K. P., Gautam A., Sarkar P. K, Continuum damage mechanics based approach for fatigue life estimation, international conference on trends in industrial and mechanical engineering, 2016.
39) Gautam A.,AjitK.P., “Static and dynamic analysis of connecting rod”, National Seminar on Recent Advancement in Manufacturing and its Management, 2014.
40) AjitK. P.,Gautam A., Static Stress Analysis of Connecting Rod Using Finite Element Approach IOSR, Journal of Mechanical and Civil Engineering (IOSR-JMCE), 10,1, 47-51,2013.
41) B. Bihari, Anil Kumar Singh, Studies on Enhancement of Wettability of Particulates in Al MMCs, International Conference on Emerging Technologies, Systems & Applications, 2018.
42) Anil Kumar Singh, B. Bihari, Synthesis and Characterization of Hybrid Reinforced Metal Matrix Composites, The 3rd International Conference on Manufacturing, Material and Metallurgical Engineering, 2018.
43) B. Bihari,Analysis of Different Sand Casting Defects in a Foundry Industry, National Conference on Advances in Environment Friendly Technology & Their Management, 2017.
44) B. Bihari, Md. Rashid Hasnain, Anil Kumar Singh, WearBehaviour of Aluminium Alloy and its Composites Reinforced byAl2O3 and Graphite, 2nd International Conference on Mechanical and Manufacturing Engineering, 2017.
45) B. Bihari, Anil Kumar Singh, The Production and Application of Metal Matrix Composites, 3rd International Conference on Advances in Steel, Power and Construction Technology, 2017.
46) B. Bihari, Anil Kumar Singh, Synthesis and Characterization of Aluminium Alloy 7075 Reinforced with Al2O3 and Graphite Particulates, International Conference on Advances in Materials and Manufacturing, 2017.
47) B. Bihari, Anil Kumar Singh,Different Fabrication Techniques of Metal Matrix Composite Materials, National Seminar on “Make in India – A Way Forward”.
48) B. Bihari, Anil Kumar Singh, Corrosion of Hybrid Metal Matrix Composite with Aluminium Alloy Substrate, 2016
49) B. Bihari, A. K. Singh, Evaluation of Mechanical Properties of Aluminium Alloy Metal Matrix Composites, 2nd International Conference on Advances in Steel, Power and Construction Technology, 2016.
50) B. Bihari, A. K. Singh, Production and Microstructural Characterization of Aluminium Alloy Metal Matrix Composite, 2015.
51) Anjanikumarsingh, B. Bihari,GhanshyamDas, Electrochemical Behavior of Reinforcing Bar in Simulated Concrete Pore Solution, 2015.
52) B. Bihari, Effect of Alloying Elements in Gray Cast Iron, 2014.
53) B. Bihari, Md. Rashid Hasnain, Anil Kumar Singh, Study on Wear Properties of Al 7075/SiC/Graphite Hybrid Composites, International Journal of Engineering Research & Technology (IJERT), 7, 01, 2018
54) B. Bihari, Md. Rashid Hasnain, Anil Kumar Singh, Wear Characteristics of Hybrid Aluminium Metal Matrix Composites Produced by Stir Casting Technique, International Journal of Scientific Progress and Research (IJSPR), 43, 121, 2018.
55) B. Bihari,SrijanPrabhakar, Anil Kumar Singh, CorrosionBehaviour of Al 7075/Al2O3/Graphite Hybrid Composite in 3.5% Sodium Chloride Solution, International Journal of Engineering Research & Technology (IJERT), 7, 01, 2018.
56) B. Bihari, Anil Kumar Singh, An Overview on Different Processing Parameters in Particulate Reinforced Metal Matrix Composite Fabricated by Stir Casting Process, International Journal of Engineering Research and Application (IJERA), 7, 1, 42-48, 2017.
57) B. Bihari, Rahul Kumar, Anil Kumar Singh, Effect on the Mechanical Properties of Gray Cast Iron with Variation of Copper and Molybdenum as Alloying Elements, International Journal of Engineering Research & Technology (IJERT), 3, 5, 2014.
58) Kumar R., L. Prasad, B.N. Prasad, Heat transfer augmentation in different configuration solar air heater, XXIV, 11, 3298-3310, 2016.
59) Kumar R., L. Prasad, B.N. Prasad., Evolution of thermal performance parameter and representation of efficiency curves in solar air heaters, 03, 2, 383-397, 2016.
60) Kumar R., L. Prasad, B.N. Prasad, Thermal performance characteristics of three sides 60o inclined wire roughened solar air heater, Journal of Engineering and Applied Sciences, 13, 4887-4891, 2018.
61) BehuraA.K.,KumarAshwini, Kumar. R. and Mishra Souren, Heat transfer enhancement of three sides artificially roughened solar air heater, Applied Science and Advanced Materials International, 2, 96-100, 2016.
62) KumarAshwini, Kumar R. andBehuraA.K., Performance analysis of three sided artificially roughened solar air heaters, Applied Science and Advanced Materials International, 2, 112-116, 2016.
63) Kumar R.,BehuraA.K.,KumarAshwini,and Dixit R. Salila, The effect of roughness and flow parameters for heat transfer enhancement in artificially roughened solar air heaters, A Review,Applied Science and Advanced Materials International, 2, 117-123,
64) KumarAshwini, Kumar R. And BehuraA.K.,InvestigationforJetPlateSolarAirHeaterwithLongitudinalFins, Int.Res.J.ofAdvancedEngineeringandScience, 02, 112-119, 2017.
65) KumarAshwini, Kumar R. andBehuraA.K., AReviewofElectroThermalCoolingSystemswithHeatsink, InternationalJournalofEngineeringResearchAndManagement, 04, 19-23, 2017.
66) KumarAshwini,BehuraA.K.,Kumar R. andKumarAmit, WireScreenMatricesPackedBedSolarAirHeaterPerformance–AnExergeticandEnergeticApproach, JournalForAdvancedResearchInAppliedScience, 04, 90-108, 2017.
67) Ashwini Kumar, Arun Kumar Behura and Kumar R. “Investigation for the Optimal Thermo Hydraulic Performance in Three Sides Artificially Roughened Solar Air Heaters”. International Research Journal of Advanced Engineering and Science, 3, 4, 162-172, 2018.
68) Kumar R., Prasad B. N., Prasad L., Evolution of thermal performance parameter and representation of efficiency curves in solar air heaters, International Conference on MAPT 2016, 12-13, 2016.
69) Kumar Ashwini,BehuraKArunand Kumar R., Performanceanalysisofthreesidedartificiallyroughenedsolarairheaters, AppliedScienceandAdvancedMaterialsInternational, 02, 112-116, 2016.
70) BehuraKArun,KumarAshwini,Kumar R. andMishra,S., Heattransferenhancementofthreesidesartificiallyroughenedsolarairheater, AppliedScienceandAdvancedMaterialsInternational, 02, 96-100, 2016.
71) KumarAshwini,Kumar R.,BehuraKArunandDixit,S.R. The effect ofroughnessandflowparameters forheattransferenhancementinartificiallyroughened solar air heaters:-Areview, AppliedScienceandAdvancedMaterialsInternational, 02, 117-123, 2016.
72) BehuraKArun,KumarAshwini,Kumar R., AnalysisofThermalPerformanceinThreeSidesArtificially RoughenedSolarAir Heaters, International ConferenceOn Advances In Refrigeration& Energy Systems-2018, 2018.
73) KumarAshwini,BehuraKarun,Kumar R. PerformanceofCollectorParametersforThreeSidesArtificiallyRoughenedSolarAirHeaters, InternationalConferenceOnAdvancesInRefrigeration&EnergySystems, 6-7, 2018.
74) Kumar R., Prasad B. N., Prasad L., National conference on AITE ,2014.
75) Kumar R., Prasad B. N., Prasad L., International Conference on GCRE, 2016.
76) Kumar R., Prasad B. N., Prasad L., International Conference on ASPCT, 2017.
77) V. Dongre, Malay Niraj, “Maintaining the overall Equipment Effectiveness Based on Evaluation Phase of Value Engineering”, International journal of scientific & Engineering Research, 7, 3, 2016.
78) V. Dongre, Malay Niraj, “Strategic evaluation of vendor Management through Fuzzy Logic Concept”, International journal of scientific & Engineering Research, 7, 1, 2016.
79) V. Dongre, Malay Niraj, “Cost Analysis of a Manufacturing Industry: By Using Rolled Throughput Yield Technique”, Transylvanian Review, 24, 3232-3237, 2016.
80) V Dongre, Malay Niraj, “Integrated Supply Chain and QFD Tool for Quality, Value and Cycle Time Management”, Transylvanian Review, 25, 3521-3530, 2017.
81) V. Dongre, Malay Niraj, “Empirical Evaluation of Service inventory: Based on Decision Making and Time Saving”, International Journal of Mechanical Engineering and Technology, 09, 4, 565-570, 2018.
82) V. Dongre, Malay Niraj, “A six sigma analysis technique for evaluation of chronic losses in an Industry or construction workshop”, International Journal of Mechanical Engineering and Technology, 09, 3, 292-300, 2018.
83) V. Dongre, Malay Niraj, “Supply Chain Management System with maintenance strategy for reimbursement of growth in industry”, International Journal of Mechanical Engineering and Technology, 09, 4, 571-576, 2018.
84) V. Dongre, Malay Niraj, “Value Engineering & Total Productive Maintenance approach for Adoption Intension in Manufacturing Industry”, Rungta international Journal of Mechanical and Automobile Engineering, 1, 2 & 3, 2016.
85) V. Dongre, Malay Niraj, “Strategy of Total Productive Maintenance for Reducing Production cost and Maximizing the Life of Equipment”, Rungta international Journal of Mechanical and Automobile Engineering,, 1, 1, 2016.
86) S. Kumar, Dr. Amit Kumar, “Comparison of Heat Transfer Coefficients of Silver Coated and Chromium Coated Copper Tubes of Condenser in Dropwise Condensation”, American Journal of Engineering Research (AJER), 5, 9, 2016.
87) S. Kumar, Dr. Amit Kumar, “Improvement of Heat Transfer Coefficient in Drop wise Condensation”, International Conference on Advances and Soft Computing Applications in Design and Manufacturing, 2018.
88) K. KUMARI. Computationally Efficient approach for identification of fuzzy dynamic groundwater sampling network, Environmental monitoring and Assessment, 2019.
89) K. KUMARI. Nature-Inspired Methods for metaheuristic Optimization methods (Chapter 8), Springer International publishing, 2020.
90) S. RAKSHIT Assessment of efficacy of clayey soil as liner material in retarding sub-surface leaching of chromium, Journal of Indian chemical society, 2019.
91) S. RAKSHIT. Physical and numerical modeling for assessing chromium migration and retention dynamics in clayey soil, Journal of Indian chemical society, 2019.
92) S. ALAM. Selection of suitable landfill site for municipal solid waste disposal: A fuzzy logic approach, Waste management and Resource efficiency, 2019.
93) N. CHANDA. Geochemical Assessment of Fluoride pollution in Ground water of Tribal Region in India, BECT, 2018.
94) S. RAKSHIT. Attenuation of phenol from aqueous solutions using fine grained soils-An experimental design using statistical approach , Journal of Hazardous, Toxic, and Radioactive waste (ASCE), 2017.
95) R. P. Sharma. Innovative Civil Engineering Building Materials, Annual Technical Paper Meet, 2018.
96) R. P. Sharma. Inclination of Critical Failure Wedge for Coulomb’s Earth Pressure, conference on “Numerical Modeling in Geomechanics(CoNMiG-17), 2017.
97) K. KUMARI. Space-time forecasting of groundwater level using hybrid soft computing, Hydrological sciences journal, 2016.
98) R.P. SHARMA. Experimental Study of Sulphate Attack on Steel Embedded in Reinforced Concrete, Journal of Construction Engineering, Technology and Management, 2016.
99) R. P. SHARMA. Analytical Study and Effect of Water Cement Ratio on the Compressive Strength and Corrosion of Reinforced Concrete, European Journal of Scientific Research, 2016.
100) S. Biswas. Plugging the Unplugged Resources of the Mangrove Forest, ECronicon Agriculture, 2016.
101) S. Biswas. Innovative Concrete Technology for Zero Maintenance, Talent Search in Civil Engineering with Innovative Ideas , The Institute of Engineers (India), 2016.
102) S. Biswas. Decadal Variation of Major Nutrients in the Aquatic Phase of East Kolkata Wetlands, International Journal of Innovative Research in Science,Engineering and Technology, 2016.
103) S. Biswas. Decadal Variation of Dissolved Oxygen in the Lower Gangetic Delta Water, International Journal of Aquaculture and Fishery Sciences, 2016.
104) S. Biswas. Concentrations of zn, cu and pb in the muscle of two edible finfish Species in and around gangetic delta region, International Journal of Life Science and Pharma Research, 2016.
105) S. Biswas. Ecosystem Service of Heritierafomes Seedlings in terms of Carbon Storage, International Journal of Trend in Research and Development, 2016.
106) S. Biswas. Spatial variation of mangrove seedling carbon with respect to salinity: A case study with Bruguieragymnorrhiza seedling, International Journal of Advanced Research in Biological Sciences, 2016.
107) A. K. Khan, B. Das, H. Sharma, R. K. Pal, T. K. Bayen, “An Algorithm for floorplanning, Placement and routing in 3D VLSI Through Silicon Vias”, International Journal of Multi-disciplinary Research and Advanced in Engineering, 4, IV, 181-194, 2012.
108) A. K. Khan, B. Das, T. K. Bayen, “A Review on Channel Routing in VLSI Design”, The IOSR International Journal for computer Engineering, 5, I, 2278-8727, 2012.
109) A. K. Khan, B. Das, T. K. Bayen, “An Efficient Approach for Four-Layer Channel Routing in VLSI Design”, International journal of VLSI Design & Communication System, 3, V, 147-156, 2012.
110) A. K. Khan, B. Das, S. Roy, “Partitioning in 3D VLSI Physical Design – A Brief Survey”, International Journal of VLSI and Embedded System, 2013.
111) A. K. Khan, B. Das, “A New Algorithm with Minimum Track for Four Layer Channel Routing in VLSI Design”, the IEEE International Conference on Computer Communication and Informatics (ICCCI), 2013.
112) A. K. Khan, B. Das, “A Review on Multi- Layer Channel Routing in VLSI Design”, 4th International Conference on Information Technology & Business Intelligence (ITBI), 2012.
113) A. K. Khan, B. Das, R. K. Pal, “A New Algorithm for partitioning in 3D VLSI Design”, International Conference on Electrical , Computer and Telecommunication Engineering, 2012.
114) A. K. Khan, B. Das, S. Roy, R. K. Pal, “A New Efficient Layer Assignment Algorithm for Partitioning in 3D VLSI Physical Design”, International Conference in St. Anthony’s College, Shilong, 2013.
115) A. K. Khan, S. Roy, B. Das, “Floorplanning in 3-D VLSI Design”, IEEE International Conference in VIT, 2013.
116) B. Das, A. K. Mahato, A. K. Khan, “Architecture and Implementation Issues of Multi-core Processors and Caching, 1stNational Conference on Research & Higher Studies in Information Technology (RHEIT), 2013.
117) SauravBhaumik, A. Mukherjee, “A Statistical Analysis on Climatic Temperature using Exponential Moving Average”, International Conference On Energy, Materials And Information Technology, 2017.
118) A. Mukherjee, SauravBhaumik, SoumyaKanti Bhattacharya, “Time Series Analysis on Ocean Wave Height using Exponential Moving Average”, International Journal of Research Publications in Engineering and Technology(IJRPET), 2, 11, 2016.
119) A. Mukherjee, SauravBhaumik, SoumyaKanti Bhattacharya, “Extremity of Indian Autonomous Underwater Vehicle: A Survey”, International Journal of Research Publications in Engineering and Technology(IJRPET), 2, 9, 2016.
120) A. Mukherjee. “A Proficient Way to Avert Malicious Transactions in Data Base Management System”. International Journal of Innovative Technology & Adaptive Management (IJITAM), 2, 6, 2015.
121) B. Das, A. K. Mahato, A. K. Khan, “Architecture and Implementation Issues of Multi-core Processors and Caching, 1stNational Conference on Research & Higher Studies in Information Technology (RHEIT), 2013.
122) A. K. Mahato, S. Naafi, D. Das “Using probabilistic optimization algorithms to reduce PAPR in OFDM System”, 2nd International Conference on Computational Intelligence, communications and Business Analytics (CICBA), 2018.
1) M. Nath. “Analysis and Identification of Kidney Stone using Kth Nearest Neighbour (KNN) and Support Vector Machine (SVM) Classification Techniques”, Pattern Recognition and Image Analysis: Advances in Mathematical
Theory and Applications, 3,3, 1054-6618, 1555-6212, 2017.
2) M. Nath. “ A Comparative Analysis of Segmentation Segmentation Techniques for Lung Cancer Detection” Pattern Recognition and Image Analysis: Advances in Mathematical
Theory and Applications, 1, 1, 1054-6618, 1555-6212, 2019.
3) S. Chakraborty. “Study of an IR Defusing Surface of a Float Used as Non-Contact Level Sensor”, Sensors & Transducers, 183, 12, 6678-6688, 2015.
4 S. Chakraborty. Study on Further Modification of Non-Contact Capacitance type Level Transducer for a Conducting Liquid, IEEE Sensors Journal, 15, 11, 6678-6688, 2015.
5) S. Chakraborty. Design of a Simple Temperature Transmitter Circuit of an Electric Heater Operated Water Bath, IEEE SENSORS JOURNAL, 18, 8, 2018.
6) S. Chakraborty. “An innovative method for the measurement of liquid level of a conducting liquid”, IEEE conference, ICCECE16, 1-5, 16-17, 2016.
7) S. Chakraborty. "Study of a modified IR defusing surface as a uniform source and its application as non-contact level sensor", IEEE conference, CIEC16, 106-110, 28-30, 2016.
8) S. Chakraborty. “A Improve Technique of Flow Measurement Using Pipe Line Pressure Head as a measuring Parameter”, IEEE conference, ICCECE17,
